Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who enjoys the flexibility of gas cooktops but needs an oven to bake in? Find a dual fuel cooker that gives you the best of both worlds.
Many experienced home chefs prefer gas cooktops due to their superior temperature control and the ability to use sophisticated cooking techniques, such as charring. These powerful stoves can be costly, especially if they require an additional gas connection as well as an electrician to install them.
What is a 13amp plug?
If you have dual fuel range cooker (also called a gas and electric oven) is required, you'll need a suitably rated 13 amp plug. duel fuel cooker must also be hard-wired by a certified electrician to the cooker ring.
This ensures that the flow of current through the plug will not exceed the safe limit which could cause an electrical fire. The plug has an electric fuse that regulates the current. The fuse will blow when it is overloaded. This protects the appliance against an overload of electricity.
The fuse is rated at 13 amps as indicated on the top of the plug. this is the maximum amount of current that the plug can carry without causing harm to the appliance or overheating the socket. It is crucial to ensure that when replacing fuses, you always use the same amperage as the original. If you replace the fuse with one of the different ratings, you are at risk of overheating the socket and possibly putting yourself and others in serious risk.
A 13 amp fuse will be a ceramic type, which is very robust and able to withstand the high temperatures produced by a range cooker. Ceramic is also fire-resistant, which makes it a more suitable choice than other types of fuse.
There are many ways to install an 13 amp plug. It could be wired to an existing live socket. the flex then connected to it using an screw or a plastic jaw type cord clamp. The clamp on the cord should be tightened after the plug is securely pushed into position.
Before connecting the wires you may need to remove the cardboard wiring diagram that is positioned over the pins of certain plugs. It is crucial that the wires are cut to the right length, as cutting them too long could cause them to be crushed when the plug cover is replaced. The earth wire must be the longest to connect it before the line and neutral pins.
How do I install an outlet with 13amps?
The vast majority of dual fuel range cookers in UK are equipped with an amp rating of 13 amps. This is important because ovens can draw significant current, and normal plug sockets have a rating of 10 amps.
In general, new appliances should be equipped with a plug at the point of sale. This is all part of complying with the Plugs and Sockets etc (Safety) Regulations 1994. Older appliances may not have a plug and this is the reason for the problem.
When connecting the cooker to an existing plug socket, the first thing that needs doing is to make sure that the rating of the fuse inside the fuse box matches the plug's rating. This is crucial since a faulty sized fuse could be dangerous.
It is also important to ensure that the fuse is installed within the cartridge and that there is no excessive movement within it. The next step is to prepare the flex to be used. First remove the sheathing from the flex in order to expose the three conductors that are insulated within. Utilize a utility knife to nick the sheathing just beyond the cord grip at the point of entry into the plug. This won't be able to penetrate the insulated conductors. The nick should be large enough that the sheathing can split and enlarge the nick as it is pulled back, revealing the cable underneath. Cut off the excess sheathing leaving about 40mm beyond the flex.
The flex is placed over the plug, with the earth terminal on the top and the live and neutral terminals on the bottom. Utilizing duel fuel ovens to guide you to the right direction, the sheathing should be removed from each pin and the internal cable is fixed to the correct terminal using the cord grip. If the plug has an attached cord clamp that is screw-type, let it loosen and then pull the insulation back to reveal the copper wires. Finally, connect each of the conductors insulated to the proper terminal (starting with the earth before neutral, and then the live) by using the channel that they run through in the plug.
What is the maximum draw of a 13 amp plug?
The maximum current draw of a 13amp plug is 3kw at 230volts. This is a lot of power, but the standard fuse in the UK plugtop will not fail until the cable has heated to a risky temperature. It is essential to be aware of the power you are using in your kitchen as a defective plug or socket could cause a fire.
The ceramic fuses that are used in plugtops measure around 25mm and are suitable for mains voltage of 240V. They'll have a BS kitemark or similar mark on the side and contain sand. Alternatives to glass or plastic are available, but should not be used in conjunction with a live plug.
In the UK the majority of dual fuel range cooker s are wired. They are not able to plug directly into a wall outlet. They are typically connected to a separate cooker ring circuit that is suitable for appliances that consume up to 20 amps.
You can check the ring circuit at your home by checking the fuse box or asking an electrician in your area. You can ask whether the sockets are connected to the same ring, or if they are distinct. They will also be able to tell you if there's a dedicated circuit to power your oven.
If you're in the market for a new dual fuel range cooker, the size of your kitchen is a vital aspect to take into consideration. We have a wide range of cookers that can fit any space. Choose from compact 50-60cm dual fuel models or huge 90cm+ double oven options from top brands like Rangemaster and StovesAreUs.
We also offer a wide range of multifunction gas and electric cookers. These multifunction cookers can be used to cook a variety of dishes such as curries, pasta, and casseroles!
Explore our full range of Cookers in Currys online or head in-store to browse. We offer free home delivery and installation on selected range cookers and we also offer flexible payment options. If you have any questions or concerns, our staff are on hand to help send us an email or give us a call. Credit is subject to status and terms and conditions apply.
What is the maximum current draw of a cooker switch?
There is a lot confusion about the maximum current draw of the cooker switch. The fact is, most cookers aren't designed to connect to an ordinary socket, but rather are hard wired and connected to a specific oven ring circuit. It is because they often consume more than 20 amps when both the gas hob and electric oven are being used.
You will not find dual fuel range cookers that can be fitted in standard sockets, because this could create an extremely high risk of fire and infringe electrical regulations. A licensed electrician must always install new electrical wiring in the kitchen, connecting them to the cooker. They will also ensure that the load of the oven and hob do not exceed the circuit's power supply capacity.
The advantages of a dual fuel cooker are the receptive cooking power of a gas stove along with the precision of an electric oven. They are therefore popular with both chefs and home cooks. If you're looking to test various cooking techniques like searing and charcoaling, a dual fuel range cooker is the perfect choice.
When purchasing a new range cooktop, you need to be aware of a number of aspects such as size, function, and price. You will also need a gas connection in your home to allow the appliance. If you aren't sure then hire a Gas Safe engineer to inspect your property before installation.
The Currys range of dual fuel range cookers offers options to suit a variety of budgets, ranging from low-cost models from Indesit and Zanussi to our own exclusive Essentials collection. If you are looking for something more sophisticated We have a range of top JennAir models that feature many unique features.
If you are buying a brand new dual fuel range cooker, it's essential to read the manual of the owner for specific information on the electrical and gas requirements. You will require a gas connection in your home. A plumber might be required to install it for you. Based on the type of home you live in, you will also need to make sure that you have a cooker ring circuit that is installed and endorsed by a qualified electrician.